Edelbrock Water Pump 1968 69 User Manual

VICTOR SERIES ALUMINUM WATER PUMPS  
For 1965-68 289 c.i.d., 1968-69 302 c.i.d. and 1969 351-W Ford V8s  
Catalog #8841 (unpolished), #8846 (polished)  
GENERAL INSTRUCTIONS  
PLEASE study these instructions carefully before installing  
• INSTALLATION  
your new water pump. If you have any questions or problems,  
do not hesitate to contact our Technical Hotline at:  
1-800-416-8628.  
Installation is the same as for original equipment water pumps.  
Consult service manual for specific procedures, if necessary.  
CAUTION: Be sure that fan bolts don't protrude through the  
hub so far that they hit the water pump housing.  
• NOTE: Check clearance between water pump body and  
crankshaft dampner. Clearance pump body or change dampner  
if necessary.  
• DESCRIPTION  
The Edelbrock aluminum water pump #8841 is a heavy duty  
water pump for both street and racing applications. The pump is  
a direct replacement for the original equipment pump (Ford  
#C5AZ-8501-H) to provide compatibility with all accessories  
and pulleys. It offers weight savings along with increased dura-  
bility and cooling potential. #8841 is a standard rotation water  
pump for 289, 302 and 351-W engines. Not for reverse rotation  
1986-93 5.0 Litre V8s with serpentine drive belt.  
Polished Aluminum Water Pump #8846 fits the same applica-  
tions as #8841.  
• SPECIAL NOTES:  
Check closely for any interference with drive belts; some filing  
for clearance may be necessary with some applications.  
• SPECIFICATIONS  
Dimension from flange surface to hub:  
#8841—  
5.4"  
• PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #____” space.  
• THANK YOU.  
©1994 Edelbrock Corp.  
11/94  
VICTOR SERIES ALUMINUM WATER PUMPS  
For 1965-68 289 c.i.d., 1968-69 302 c.i.d. and 1969 351-W Ford V8s  
Catalog #8841 (unpolished), #8846 (polished)  
GENERAL INSTRUCTIONS  
PLEASE study these instructions carefully before installing  
• INSTALLATION  
your new water pump. If you have any questions or problems,  
do not hesitate to contact our Technical Hotline at:  
1-800-416-8628.  
Installation is the same as for original equipment water pumps.  
Consult service manual for specific procedures, if necessary.  
CAUTION: Be sure that fan bolts don't protrude through the  
hub so far that they hit the water pump housing.  
• NOTE: Check clearance between water pump body and  
crankshaft dampner. Clearance pump body or change dampner  
if necessary.  
• DESCRIPTION  
The Edelbrock aluminum water pump #8841 is a heavy duty  
water pump for both street and racing applications. The pump is  
a direct replacement for the original equipment pump (Ford  
#C5AZ-8501-H) to provide compatibility with all accessories  
and pulleys. It offers weight savings along with increased dura-  
bility and cooling potential. #8841 is a standard rotation water  
pump for 289, 302 and 351-W engines. Not for reverse rotation  
1986-93 5.0 Litre V8s with serpentine drive belt.  
Polished Aluminum Water Pump #8846 fits the same applica-  
tions as #8841.  
• SPECIAL NOTES:  
Check closely for any interference with drive belts; some filing  
for clearance may be necessary with some applications.  
• SPECIFICATIONS  
Dimension from flange surface to hub:  
#8841—  
5.4"  
• PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #____” space.  
• THANK YOU.  
©1994 Edelbrock Corp.  
11/94  
 

Cobra Digital Digital Camera AM D531K AGB CBA User Manual
Craftsman Pressure Washer 919670281 User Manual
Cuisinart Fondue Maker CFO 1000 User Manual
Curtis Flat Panel Television RLC5534A User Manual
Dacor Double Oven EORX230 User Manual
Delta Electronics Network Card TDV User Manual
DMP Electronics Home Security System XR500 User Manual
Elation Professional Projector 250B User Manual
Extron electronic Network Card IPL T SFI244 User Manual
Extron electronic Network Card PIP 422 User Manual